THE FULL-FEATURED PRESSPOWER 2 IS THE SUCCESSOR TO OUR ORIGINAL PRESSPOWER UNIT, THE STANDARD FOR PRESS CONFERENCES WORLDWIDE.
IT FEATURES 2 MIC/LINE INPUTS WITH INDIVIDUAL GAIN CONTROLS AND 16 TRANSFORMER ISOLATED OUTPUTS THAT ARE INDIVIDUALLY SWITCHABLE FOR MIC OR LINE LEVEL OPERATION. THE PRESSPOWER 2 INCLUDES A 20-SEGMENT LED LEVEL METER, AN INTERNAL TEST TONE GENERATOR, A BUILT-IN HEADPHONE MONITOR AMP WITH VOLUME CONTROL, HIGH-PASS FILTERS, AND PHANTOM POWER -- ALL CONVENIENTLY FRONT-PANEL ACCESSIBLE.
MANUFACTURERS A STOCK BRAND NEW WITH FULL FACTORY WARRANTY. FOB, NY.
WWW.SOUNDBROKER.COM LINKING BUYERS AND SELLERS TOGETHER SINCE 1997 FOR NEW AND USED PROFESSIONAL AUDIO, LIGHTING, STAGING, PROJECTORS, AND VIDEO EQUIPMENT.
|Condition:||MFG A STOCK|
|Shipping Info:||0.00 lbs.,|
|Seller's Location:||NY, USA|
|Updated:||November 25, 2020|
|Offered at:||Contact Us|
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
Wireless microphone device that operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies.
Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed.
NOTE – This has not changed at all and has been in effect for over 20 years. If you qualify and wish to apply for a license go to:
Look under BROADCAST AUXILIARY – Land Mobile (Part 74) You will need forms FCC 601 Schedule d and Schedule H
From the FCC docket 10-16 – Page 7 – (boldface has been added by us)
10. Under Section 74.832, only certain entities may be issued licenses authorizing the use of low power auxiliary stations. In particular, these entities fall within the following categories: (1) licensees of AM, FM, TV, or International broadcast stations or low power TV stations; (2) broadcast network entities; (3) certain cable television system operators; (4) motion picture and television program producers as defined in the rules; and (5) certain entities with specified interests in Broadband Radio Service (BRS) and Educational Broadcast Service (EBS) licenses, i.e., BRS licensees (formerly licensees and conditional licensees of stations in the Multipoint Distribution Service and Multi-channel Multipoint Distribution Service), or entities that hold an executed lease agreement with a BRS licensee or conditional licensee or entities that hold an executed lease agreement with an Educational Broadcast Service (formerly Instructional Television Fixed Service) licensee or permittee.25 Cable television operations, motion picture and television program producers may be authorized to operate low power auxiliary stations only in the bands allowed for TV broadcasting.26 All classes of broadcast auxiliary stations provided for in Subpart H, except wireless video assist devices (WVADs), may be operated on a short term basis under the authority conveyed by a Part 73 license or a broadcast auxiliary license without prior authorization, subject to conditions.
To purchase or list using the services of SoundBroker.com, you must be a
member of SoundBroker.com and agree to our terms and conditions. If you
are a VIP-Loyalty Club Member, please Log In to
see your price (unfortunately, due to the nature of the
economy, SoundBroker.com does not accept low offers from our Gold
Members). Click here for
details on becoming a VIP-Loyalty Club Member.
All listings on SoundBroker.com are subject to change &/or cancellation without notice. All items listed are pre-owned and priced per unit unless noted in the description. SoundBroker.com reserves the right to accept or decline any listing or purchase. Due to the contractual agreement we can only sell & ship this item to an address in the United States.