CROWN XTI 6000 (TWO OF THEM!!)
[PRICE SHOWN FOR THE ENTIRE CONTENT OF THIS LISTING]
Listing last update on January 20, 2016 - Viewed 57 times

CROWN XTI 6000 (YOM: 2009) (S#: 8001705788) SUPERB (8-9)

FEATURES: THE POWER AMPLIFIER SHALL MEET OR EXCEED THE FOLLOWING POWER CRITERIA AT 1KHZ: 2 OHM STEREO (PER CHANNEL): 3,000W WITH 1%THD, 4 OHM STEREO (PER CHANNEL): 2,100W WITH 0.5% THD, 8 OHM STEREO (PER CHANNEL): 1,200W WITH 0.5% THD, 4 OHM BRIDGE-MONO: 6,000W WITH 1% THD, 8 OHM BRIDGEMONO: 4,200W WITH 0.5% THD.

THE AMPLIFIER SHALL INCLUDE DIGITAL SIGNAL PROCESSING WITH THESE FUNCTIONS:
INPUT EQ: 6 PARAMETRIC FILTERS PER CHANNEL WITH ADJUSTABLE Q, ±15 DB BOOST/
CUT. ALSO ADJUSTABLE HIGH AND LOW SHELVING FILTERS. THIS 8-FILTER EQ SECTION CAN BE BYPASSED.
CROSSOVER FILTERS: HIGH PASS AND LOWPASS PER CHANNEL. BUTTERWORTH 6/12/18/24 DB PER OCTAVE. LINKWITZ-RILEY 24/48 DB PER OCTAVE. ALSO INCLUDES ±15 DB BANDPASS GAIN AND POLARITY CONTROL.
DELAY: FOR SIGNAL ALIGNMENT OF DRIVER; 50 MS TOTAL DELAY.
SUBHARMONIC SYNTHESIZER: TAKES THE LOW-FREQUENCY CONTENT OF THE INPUT SIGNAL AND “SYNTHESIZES” A NEW SIGNAL THAT IS THE SAME AS THE INPUT SIGNAL
BUT ONE OCTAVE LOWER. THE NEW SYNTHESIZED SIGNAL IS THEN MIXED WITH THE ORIGINAL SIGNAL TO CREATE THE EFFECT.
OUTPUT LIMITER: PREVENTS CLIPPING.
PRESETS: 20 PRESETS, 19 OF WHICH ARE USER-DEFINABLE.

EXTRAS: IEC POWER CABLE

MODIFICATIONS: DATE OF MANUFACTURE: 12/14/2009

HISTORY: INSTALLED IN A PRIVATE HIGH SCHOOL GYM AUDIO RACK. USED TO PLAY MUSIC AT SPORTING EVENTS. AMP KEPT IN A RACK IN A LOCKED CLOSET. NO PROBLEMS

COMMENTS: NO PROBLEMS, GREAT CONDITION.

WOULD LIKE TO SELL BOTH OF THEM AS A LOT.

WILLING TO NEGOTIATE IF BUYER WOULD ONLY LIKE ONE OF THE AMPS.

THIS UNIT WAS NEVER TOURED