(Celebrating our 27th anniversary linking buyers and sellers)

Welcome to SoundBroker.com's Direct 2 Seller store. Items listed here can be bought and sold directly between buyers and sellers without SoundBroker.com's involvement thus eliminating our fees and saving you money. URGENT NOTICE: Buying using this service you take all risks related to buying or selling these items. In order to limit your risk, for a 10% fee (Fee Schedule), you can opt into SoundBroker.com's Secure Transaction Service whereas you pay SoundBroker.com for the item and we'll hold onto the money for the seller until the transaction is complete or click on the link below to return to SoundBroker.com and purchase the item using our normal methods.
Fee ScheduleDisclaimer

ID # 101281    DIRECT TO SELLER CURRENT CATEGORY - SIGNAL TRANSPORT


For Sale: LECTROSONICS M2T - 1/2 RACK IEM/IFB TRANSMITTER WITH DANTE
[PRICED PER UNIT - NEW FROM MANUFACTURER - CALL FOR AVAILABILITY]
Listing last update on August 18, 2020 - Viewed 127 times

LECTROSONICS M2T - 1/2 RACK IEM/IFB TRANSMITTER WITH DANTE

LECTROSONICS M2T

THE M2T HALF-RACK TRANSMITTER HOUSES TWO INDEPENDENT STEREO TRANSMITTERS ALLOWING FOR UP TO FOUR STEREO OR DUAL-MONO TRANSMISSIONS IN A SINGLE RACK SPACE. THE AUDIO INPUTS CAN BE INDIVIDUALLY CONFIGURED TO BE ANALOG OR DANTE COMPATIBLE.

THE ANALOG INPUT CONNECTORS ARE FULL-SIZE XLR/TRS COMBO TYPES FOR BALANCED LINE LEVEL ANALOG SIGNALS WHILE THE INPUT PREAMP CIRCUITS USE A SPECIAL BALANCED AMPLIFIER WITH VERY HIGH COMMON MODE REJECTION TO MINIMIZE HUM AND NOISE.

A DANTE™ ULTIMO™ INTERFACE VIA DUAL RJ45 CONNECTORS ACCEPTS DANTE NETWORKED AUDIO INPUTS AND CAN CASCADE THE DIGITAL STREAM TO ADDITIONAL UNITS VIA CAT6 CABLES. AN ADDITIONAL RJ45 JACK PROVIDES AN ETHERNET CONNECTION FOR PROGRAMMING AND CONTROL VIA WIRELESS DESIGNER™ SOFTWARE AND A USB JACK ON THE FRONT PANEL ALLOWS FOR FIRMWARE UPDATES. THE TRANSMITTER FEATURES A FULL COLOR, BACKLIT LCD FOR HIGH VISIBILITY IN ANY ENVIRONMENT, WHILE THE CHASSIS IS ALL-METAL AND CAN BE RACKED SINGLY OR IN PAIRS USING INCLUDED RACK MOUNT HARDWARE. 

DESCRIPTION:

  • IEM (WIRELESS MONITOR) WITH DIGITAL RF TRANSMISSION
  • 24-BIT DIGITAL AUDIO
  • 2 INDEPENDENT STEREO AUDIO TRANSMISSIONS PER 1/2 RV ENCLOSURE
  • USB PORT FOR FIRMWARE UPDATES
  • FULLY DANTE™ COMPATIBLE
  • IR (INFRARED) PORT FOR FAST SETUP
  • UP TO 50 MW PER RF CARRIER
  • ALL METAL HOUSING
  • COMPATIBLE WITH WIRELESS DESIGNER™ SOFTWARE

OPTIONS AVAILABLE:

M2R - STEREO BELT PACK RECEIVER

RMPM2T - RACK MOUNT KIT FOR ONE M2T TRANSMITTER

FMAKM2T - FRONT MOUNT ANTENNA KIT FOR THE M2T WITH RMPRM2T-1

 

BRAND NEW WITH FULL FACTORY WARRANTY, FOB NM, USA.

WWW.SOUNDBROKER.COM  LINKING BUYERS AND SELLERS TOGETHER SINCE 1997 FOR NEW AND USED PROFESSIONAL AUDIO, LIGHTING, STAGING, PROJECTORS, AND VIDEO EQUIPMENT.

Additional Details
ID#: DS101281
Listing Type: Direct Discount Available
Model: M2T DANTE
Manufacturer: LECTROSONICS
Condition: MFG A STOCK
Shipping Info: 0.00 lbs.,
Seller's Location: NM, USA
Updated: August 18, 2020
M.S.R.P.: $0.00
Offered at:
Login to Purchase
CONSUMER ALERT

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

Wireless microphone device that operate in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies.

Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed.

NOTE – This has not changed at all and has been in effect for over 20 years. If you qualify and wish to apply for a license go to:

http://www.fcc.gov/Forms/Form601/601.html

Look under BROADCAST AUXILIARY – Land Mobile (Part 74) You will need forms FCC 601 Schedule d and Schedule H

From the FCC docket 10-16 – Page 7 – (boldface has been added by us)

10. Under Section 74.832, only certain entities may be issued licenses authorizing the use of low power auxiliary stations. In particular, these entities fall within the following categories: (1) licensees of AM, FM, TV, or International broadcast stations or low power TV stations; (2) broadcast network entities; (3) certain cable television system operators; (4) motion picture and television program producers as defined in the rules; and (5) certain entities with specified interests in Broadband Radio Service (BRS) and Educational Broadcast Service (EBS) licenses, i.e., BRS licensees (formerly licensees and conditional licensees of stations in the Multipoint Distribution Service and Multi-channel Multipoint Distribution Service), or entities that hold an executed lease agreement with a BRS licensee or conditional licensee or entities that hold an executed lease agreement with an Educational Broadcast Service (formerly Instructional Television Fixed Service) licensee or permittee.25 Cable television operations, motion picture and television program producers may be authorized to operate low power auxiliary stations only in the bands allowed for TV broadcasting.26 All classes of broadcast auxiliary stations provided for in Subpart H, except wireless video assist devices (WVADs), may be operated on a short term basis under the authority conveyed by a Part 73 license or a broadcast auxiliary license without prior authorization, subject to conditions.

To purchase or list using the services of SoundBroker.com, you must be a member of SoundBroker.com and agree to our terms and conditions. If you are a VIP-Loyalty Club Member, please Log In to see your price (unfortunately, due to the nature of the economy, SoundBroker.com does not accept low offers from our Gold Members). Click here for details on becoming a VIP-Loyalty Club Member.

All listings on SoundBroker.com are subject to change &/or cancellation without notice. All items listed are pre-owned and priced per unit unless noted in the description. SoundBroker.com reserves the right to accept or decline any listing or purchase. Due to the contractual agreement we can only sell & ship this item to an address in the United States.