JBL PRX 615 1,000 WATT SELF-POWERED SPEAKER
[PRICED PER UNIT - 3 AVAILABLE AT TIME OF LISTING]
Listing last update on November 11, 2015 - Viewed 56 times

JBL JBL PRX615 (YOM: 2011) (S#: STILL HAVE THEM) GOOD (7-8)

FEATURES: THE 2-WAY 15" OFFERS THE PERFECT BALANCE BETWEEN SIZE AND PERFORMANCE. THE PRX615M TRULY IS AN EXCEPTION; IT’S SMALL, LIGHT WEIGHT, VERSATILE AND POWERFUL. THE PERFORMANCE AND ASYMMETRICAL DESIGN MAKE THIS A PERFECT CHOICE FOR MUSICIANS, ENTERTAINERS AND DJ’S WHEN PORTABILITY IS KEY, OR WHEN HUNG BY THE SUSPENSION POINTS, AN EXCEPTIONAL LIGHT-DUTY INSTALLATION SPEAKER. ALL PRX600 SERIES SPEAKERS WERE DESIGNED TO EXCEL IN SOUND REINFORCEMENT WHERE CHALLENGING AUDIO ENVIRONMENTS AND LOUD VOLUMES ARE THE NORM. FOR APPLICATIONS REQUIRING FULL BANDWIDTH SOUND REPRODUCTION, THE PRX615M DELIVERS THE OPTIMUM BALANCE. FOR LIVE MUSIC, RECORDED MUSIC PLAYBACK AND SPEECH THE USER HAS THE OPTION OF TAILORING THE EQ, ‘FLAT’ FOR SPEECH INTELLIGIBILITY, AND ‘BOOST’ FOR ENHANCED BASS AND CRISP HIGHS IN RECORDED MUSIC PLAYBACK. A MICROPHONE CAN BE DIRECTLY CONNECTED TO THE SPEAKER INPUT FOR QUICK PA APPLICATIONS. COUPLED WITH A PRX600 SUB-WOOFER THE SYSTEM BECOMES AN EFFICIENT, FULL-RANGE SOUND SYSTEM.
THE PRX615M IS COMPRISED OF A 380 MM (15 IN) 265F DIFFERENTIAL DRIVE® DUAL VOICE-COIL AND MAGNETIC GAP, NEODYMIUM WOOFER, A 2408H-1 37.5 MM (1.5 IN) ANNULAR POLYMER DIAPHRAGM, NEODYMIUM COMPRESSION DRIVER MOUNTED TO A 90° BY 50° HORN, ALL DRIVEN BY 1000 WATT (DUAL 500 WATT) CROWN® CLASS-D POWER AMPLIFIER. A PROPRIETY DSP CHIP IS AT THE CORE OF A FULLY FEATURED INPUT SECTION, PROVIDING USER SELECTABLE SYSTEM EQ, PROTECTION, INPUT SENSITIVITY SELECTION, CROSS-OVER FUNCTIONALITY, DYNAMIC LIMITING AND DISCRETE COMPONENT OPTIMIZATION.
ALL PRX600 CABINETS ARE BUILT FROM A COMBINATION OF 25MM (ON THE TOP AND BOTTOM FOR ADDED RIGIDITY) AND 18MM, STRONG, LIGHT-WEIGHT POPLAR PLYWOOD MADE STRUCTURALLY SOUND WITH TONGUE AND GROOVE JOINTS. ALL PRX600 SERIES CABINETS ARE PROTECTED BY JBL’S TOUR PROVEN DURAFLEX™ FINISH. GRILLES ARE MADE FROM DENT-RESISTANT 16 GAUGE STEEL AND HANDLES ARE MADE FROM LIGHT-WEIGHT GLASS-FILLED NYLON FOR ADDED STRENGTH AND DURABILITY. ALL M10 SUSPENSION POINTS ARE CONSTRUCTED FROM 14 GAUGE STEEL AND HAVE BEEN TESTED WITH A YIELD-STRENGTH OF 1000 LBS. EACH.
THE AMPLIFIER INPUT PANEL OFFERS XLR OR ¼ INCH JACK COMPATIBILITY AND A SENSITIVITY SWITCH PROVIDES EXTRA FLEXIBILITY, MAKING IT POSSIBLE TO CONNECT LITERALLY ANY SOUND SOURCE WITHOUT USING A MIXER. SIGNAL PRESENT AND OVERLOAD LIGHTS INDICATE THE SYSTEM STATUS AND ASSIST IN SETTING THE OPTIMUM LEVEL, VIA THE LEVEL CONTROL KNOB.

EXTRAS: SOFT COVER IS INCLUDED.

MODIFICATIONS: NONE

HISTORY: CORPORATE SHOWS

COMMENTS: GREAT SPEAKERS FOR CORPORATE, BAND OR DJ.

THIS UNIT WAS NEVER TOURED